Drafts & Air Leakage
Noticeable air movement around the sash or frame can point to failed seals, installation gaps or worn components.
Licensed and Insured - Lic. #364022
Call for Free Inspection - (505) 324-1094
(505) 324-1094
mymail@mailservice.com
Replace failing, drafty or damaged windows with a properly planned exterior system. Magic Roofing coordinates window work around the wall opening, trim, flashing, siding and weather exposure instead of treating the glass as the only thing that matters.
Window performance depends on far more than the glass. The frame, sill, flashing, sealants, wall transition and exterior trim all have to control air and water while allowing the opening to drain correctly.
That is why Magic Roofing approaches window work as part of the exterior envelope. When windows are replaced during a siding, roof or broader exterior project, the surrounding details can be coordinated instead of patched together by separate crews.
Not every old window needs immediate replacement. These are common conditions that justify a closer evaluation.
Noticeable air movement around the sash or frame can point to failed seals, installation gaps or worn components.
Condensation or haze between glass panes usually indicates a failed insulated-glass seal.
Staining near the sill, trim or wall can indicate failed sealant, flashing or drainage around the opening.
Binding, damaged balances, warped frames or failed hardware can make normal operation difficult or unsafe.
Rot, impact damage, severe UV deterioration or failed exterior trim can compromise the opening.
Siding or major exterior work can be an efficient time to replace windows because flashing and trim are already exposed.
Farmington-area homes see strong UV exposure, dry conditions, wind and substantial seasonal temperature changes. Those conditions put repeated stress on glass seals, exterior caulking, frames and trim.
The goal is not to chase a universal 'best window.' The goal is to match the product and installation method to the opening, orientation, exterior finish and homeowner priorities.
Review operation, frame condition, visible leakage, trim and surrounding siding.
Confirm size, configuration, frame and glass options based on the project requirements.
Remove or prepare the existing unit, install the new window and integrate flashing and seals.
Complete trim, sealant and siding transitions, then verify operation and cleanup.
Common signs include drafts, fogging between panes, damaged frames, water staining, difficult operation, cracked glass or repeated sealant failures.
Yes, when the project scope allows it. Coordinating windows and siding can make it easier to integrate flashing, trim and weather-resistant layers around the opening.
There is no single best material for every home. Frame material, glass package, exposure, maintenance priorities, opening size and budget should be compared for the specific project.
Properly selected and installed windows can reduce drafts and unwanted heat transfer, but total comfort also depends on insulation, air sealing, shading and HVAC performance.
Some issues may be repairable depending on the hardware, glass, seal or trim involved. Magic Roofing can review the visible condition and help determine whether repair or replacement is the more practical path.
Farmington and San Juan County are the primary local market, with qualifying Four Corners projects reviewed based on location, scope and scheduling.
Request a window evaluation from Magic Roofing and get a recommendation that considers the opening, flashing, trim and surrounding exterior system.